- Andere Unternehmen von Fluke:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
Adding Upper and Lower Limits to an EVAL -e Procedure Line
It is sometimes necessary to use an EVAL –e FSC in a procedure that evaluates that a test is within two limits. The following procedure example give several ways to do this evaluation.
=============================================================================
INSTRUMENT: Example of EVAL with upper and lower limits
DATE: 2002-06-03
AUTHOR: William J. Spath
REVISION:
ADJUSTMENT THRESHOLD: 70%
NUMBER OF TESTS: 4
NUMBER OF LINES: 47
=============================================================================
STEP FSC RANGE NOMINAL TOLERANCE MOD1 MOD2 3 4 CON
1.001 LABEL Enter_Number
1.002 MEMI Enter a number between -100 and +100
1.003 JMPL Good_Number ((MEM >= -100) + (MEM <= 100)) > 1
1.004 DISP the number you entered ( [MEM] ) is not between
1.004 DISP -100 and +100!! Try again
1.005 JMPL Enter_Number
1.006 LABEL Good_Number
1.007 MATH M[1] = -100 ; M[2] = -50
1.008 MATH S[1] = "Is " & MEM & " >= " & M[1] & " and <" & M[2]
1.009 EVAL -e ((MEM >= M[1]) + (MEM < M[2])) > 1 : [S1]
2.001 MATH M[1] = -50 ; M[2] = 0
2.002 MATH S[1] = "Is " & MEM & " >= " & M[1] & " and <" & M[2]
2.003 EVAL -e ((MEM >= M[1]) + (MEM < M[2])) > 1: [S1]
3.001 MATH M[1] = 0 ; M[2] = 50
3.002 MATH S[1] = "Is " & MEM & " >= " & M[1] & " and <" & M[2]
3.003 EVAL -e ((MEM >= M[1]) + (MEM < M[2])) > 1: [S1]
4.001 MATH M[1] = 50 ; M[2] = 100
4.002 MATH S[1] = "Is " & MEM & " >= " & M[1] & " and <" & M[2]
4.003 EVAL -e ((MEM >= M[1]) + (MEM < M[2])) > 1: [S1]
- Startseite
- Produkte
- Neue Produkte
- Elektrische Kalibrierung
- HF-Kalibrierung
- Datenerfassung und Testgeräte
- Temperaturkalibrierung
- Feuchtekalibrierung
- Druckkalibrierung
- Kolbenmessgeräte
- Controller/Kalibratoren
- Druckmonitore
- Druckwaagen
- Manuelle Kalibratoren und Monitore
- Handheld Pressure Calibrators
- Luftdaten-Kalibrierung
- Messgeräte zur Überwachung der Umgebungsbedingungen
- Druckkalibrierungszubehör
- Benutzerdefinierte Druckkalibriersysteme
- Software zur Druckkalibrierung
- Durchflusskalibrierung
- Prozesskalibratoren
- Kalibriersoftware
- Service und Support
- Alle Kalibriergeräte
- Hand-Messgeräte
- Kaufinfo
- Aktuelles
- Schulung/Veranstaltungen
- Literatur/Ausbildung
- Service/Unterstützung
- Service Request (RMA)
- Serviceprogramme
- Technischer Support
- Wissensbasis
- Akkreditierung
- Autorisierte Servicezentren
- Calibration Certificates
- Community Forum
- My MET/SUPPORT
- Produkthandbücher (Bedienungsanleitungen)
- Sicherheitsdatenblätter (SDS)
- Recyclingprogramm
- Safety, Service, and Product Notices
- Gewährleistungen
- Software-Downloads
- Über uns