P5513 Pneumatic Comparison Test Pump

P5513 Pneumatic Comparison Test Pump
P5513 Pneumatic Comparison Test Pump
P5513 Pneumatic Comparison Test Pump
P5513 Pneumatic Comparison Test Pump
P5513 Pneumatic Comparison Test Pump
P5513 Pneumatic Comparison Test Pump
P5513 Pneumatic Comparison Test Pump
P5513 Pneumatic Comparison Test Pump

  • High pressure pneumatic operation
  • Screw press for fine pressure adjustments
  • High quality needle valves for fine control
  • Test port adapters which require no PTFE tape or wrenches
  • Sturdy carrying case with lid
  • Can be used with the 2700G Reference Pressure Gauge to provide a complete calibration solution

Pressure range 0 to 3,000 psi (210 bar)

This pneumatic comparison test pump is designed for testing pressure measuring instruments against master test instruments. This cost effective instrument provides precise control for important calibration requirements and include many features found in our popular line of pneumatic deadweight testers.

Note: Unit requires pressure source (i.e. nitrogen bottle) for operation.

Specifications

Pressure Range 0 to 3,000 psi (210 bar)
Instrument Size (W x D x H) 17.5 x 12 x 8.5 in (440 x 300 x 215 mm)
Instrument Weight 17 lbs ( 8 kg)
Test Port Adapters 2 sets, 1/8, 1/4, 3/8 and 1/2 NPT or BSP
Gas Supply Connection 1/4 NPT female

Model Name Description
P5513-20M

Pneumatic Comparison Test Pump

Accessories common to all models:

Accessory Description
5540 Metric and 5541 BSP Adapter Sets

P5540 Metric
M14 x 1.5, M20 x 1.5, 1/8 and 1/4 BSP

P5541 BSP
1/8, 1/4, 3/8 and 1/2 BSP

P5542 NPT
1/8, 1/4, 3/8 and 1/2 NPT

P5543 Angle Adapter

To calibrate gauges with the pressure connection on the rear (for example, panel mount gauges) in their correct operating position, an angle adaptor should be used. The angle adapter uses the standard gauge adapters and positions the gauges at 90º. The maximum working pressure of this unit is 10,000 psi (700 bar).

P5544 Two Gauge Stand

This adapter mounts directly to the test port of the calibrator and allows for the calibration of two instruments at the same time, or the connection of a reference test instrument. Maximum working pressure is 10,000 psi (700 bar).

P5551 Pointer Remover/Punch

This tool is designed to quickly remove and consistently refit the pointer of a pressure gauge.