- Andere Unternehmen von Fluke:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
Using Fixed-Point Cells with MET/TEMP II
- Can I use MET/TEMP II to perform calibrations using fixed-point cells?
- Can I mix fixed-points set-points and comparison set-points on the same calibration?
- What fixed-point cells can be used with MET/TEMP II?
Questions and Answers
Q. Can I use MET/TEMP II to perform calibrations using fixed-point cells?
A. Yes. MET/TEMP II now supports using fixed-point cells. Because fixed-point cells typically allow a single probe to be inserted at a time, MET/TEMP II prompts you at the appropriate times to insert one UUT into the cell, counts down a user-defined soak time, then takes readings from that UUT. This process repeats for all UUTs.
Q. Can I mix fixed-points set-points and comparison set-points on the same calibration?
A. Fixed-point set-points can be mingled with comparison set-points, or MET/TEMP II can be configured to perform fixed-point only calibrations.
Q. What fixed-point cells can be used with MET/TEMP II?
A. MET/TEMP II ships with a list of all fixed-point cells that Hart manufactures. You are simply required to enter the serial number of your cell before it can be used. You can add support for as many fixed-point cells as you want. Simply fill in the model, serial number, manufacturer, description, method of realization, reference temperature and dates (optional) and add it to your list. Since MET/TEMP II cannot actually differentiate between a fixed-point cell and a cup of ice, this feature can prove very useful for adding support for many types of fixed temperature heat sources such as the Hart Model 9101 Ice Point or a bath or furnace that constantly operates at one temperature.
- Startseite
- Produkte
- Neue Produkte
- Elektrische Kalibrierung
- HF-Kalibrierung
- Datenerfassung und Testgeräte
- Temperaturkalibrierung
- Feuchtekalibrierung
- Druckkalibrierung
- Kolbenmessgeräte
- Controller/Kalibratoren
- Druckmonitore
- Druckwaagen
- Manuelle Kalibratoren und Monitore
- Handheld Pressure Calibrators
- Luftdaten-Kalibrierung
- Messgeräte zur Überwachung der Umgebungsbedingungen
- Druckkalibrierungszubehör
- Benutzerdefinierte Druckkalibriersysteme
- Software zur Druckkalibrierung
- Durchflusskalibrierung
- Prozesskalibratoren
- Kalibriersoftware
- Service und Support
- Alle Kalibriergeräte
- Hand-Messgeräte
- Kaufinfo
- Aktuelles
- Schulung/Veranstaltungen
- Literatur/Ausbildung
- Service/Unterstützung
- Service Request (RMA)
- Serviceprogramme
- Technischer Support
- Wissensbasis
- Akkreditierung
- Autorisierte Servicezentren
- Calibration Certificates
- Community Forum
- My MET/SUPPORT
- Produkthandbücher (Bedienungsanleitungen)
- Sicherheitsdatenblätter (SDS)
- Recyclingprogramm
- Safety, Service, and Product Notices
- Gewährleistungen
- Software-Downloads
- Über uns