- Otras empresas de Fluke:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
An Apparatus for the Approximation of The Triple Point of Argon
SPRT calibration over the ITS-90 sub-range of 83.8058 K to 273.16 K requires measurement at three defining fixed points—the triple points of water, mercury, and argon. Cells and apparatus are commercially available for the realization of these defining fixed points. Several factors have resulted in the widespread implementation of only two of these defining fixed points—the triple points of water and mercury. Comparison calibration in a simple liquid nitrogen comparison apparatus is typically substituted for the triple point of argon. For this substitution to be useful, the measurement uncertainty achievable in the comparison system must approach that achievable in the argon system. Several challenges arise. At one standard atmosphere, the normal boiling point of liquid nitrogen is approximately 77.36 K, about 6.4 K below the lower limit of the sub-range, resulting in extrapolation of the reference thermometer. Additionally, the design of the comparison apparatus affects the uncertainties attainable. Finally, boiling points are highly influenced by environmental conditions, further complicating the measurements. Metrologists at Hart Scientific have developed and built an apparatus intended to attain sub-millikelvin uncertainties using comparison techniques in liquid nitrogen. The apparatus was designed to reduce effects from conduction and is capable of self-pressurization to increase the boiling point to a value closer to the argon triple point. This paper will discuss the apparatus, techniques, and results of this effort.
- Inicio
- Productos
- Novedades de Fluke Calibration
- Calibración eléctrica
- Calibración de radiofrecuencia
- Equipo de adquisición de datos y pruebas
- Calibración de temperatura
- Calibración de humedad
- Calibración de presión
- Manómetros de pistón
- Controladores/Calibradores
- Monitores de presión
- Balanzas de pesos muertos
- Monitores y calibradores manuales
- Handheld Pressure Calibrators
- Calibración de datos de aire
- Monitores ambientales
- Accesorios de calibración de presión
- Sistemas personalizados de calibración de presión
- Software de calibración de presión
- Calibración de flujo
- Calibradores de procesos
- Software de calibración
- Servicio y soporte técnico
- Todos los instrumentos de calibración
- Instrumentos portátiles
- Comprar
- Novedades
- Capacitación y eventos
- Literatura y educación
- Soporte Técnico
- Service Request (RMA)
- Programas de servicio
- Servicio técnico
- Base de Conocimientos
- Acreditaciones
- Centros de servicio autorizados
- Calibration Certificates
- Community Forum
- My MET/SUPPORT
- Manuales de productos (guías de usuario)
- Hojas de datos sobre la seguridad (SDS)
- Programa de reciclado
- Safety, Service, and Product Notices
- Descargas de software
- Garantias
- Sobre Nosotros