- Otras empresas de Fluke:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
Consulte más marcas de Fluke
The first step to selecting the right pressure calibration product is to understand the specifications of the device under test (DUT). Following is a summary of which products are used to calibrate different categories of DUTs, based on total one-year measurement uncertainty specifications (assumes a 4:1 test uncertainty ratio is desired). |
Total uncertainty specification of the device to be tested | Calibration standards typically used for this application | Typical total 1-yr uncertainty of reference standard |
±0.08% and greater Pressure measurement devices: gauges, sensors… |
Fluke handheld process calibration tools | 0.025% to 0.25% |
PPC4E wide-range gas pressure controller/calibrator | 0.02% | |
E-DWT hydraulic electronic deadweight tester | 0.02% | |
±0.03% to 0.075% Medium performance sensors and calibration transfer standards |
PPC and 7000 pressure controller/calibrators | 0.008% to 0.015% |
RPM and 7050 reference pressure monitors | 0.008% to 0.015% | |
P3000 deadweight testers and M3800 deadweight testers | 0.008% to 0.015% | |
NOTE: These models are also often used for calibration of the pressure measurement devices listed above | ||
±0.025% and less High performance sensors and calibration standards |
PG7000, FPG8601, and 2400 piston gauges | <0.001% to 0.01% |
NOTE: These models are also often used for calibration of the pressure measurement devices and calibration standards listed above |