- Otras empresas de Fluke:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
Extra-deep wells for thermometry work requiring extra tank depth and ultimate stability
- Constant liquid levels through concentric-tube design
- Special design for sighting LIG thermometers
- Depth up to 60 cm (24 in)
- Optional interface packages control all settings
The models 6054, 6055 and 7007 have extra-deep wells for use with liquid-in-glass thermometers, SPRT calibrations, or other thermometry work requiring extra tank depth. They were originally designed for NIST.
Well depths vary from 17 to 24 inches to eliminate stem conduction effects in probes that require more than 12 inches of immersion. Originally developed for a national standards lab, these baths are optimized for the visual calibration of liquid-in-glass thermometers.
The 6054 covers the temperature range of 50 °C to 300 °C, is also 24 inches deep, and comes with a removable stainless steel cover.
The 6055 is engineered for the temperature range of 200 °C to 550 °C with salt and is 17 inches deep. Specific size differences and various specifications are shown in the comparison table.
The Model 6055, operating up to 550 °C, uses molten salts with a pumping system for maintaining the necessary consistent fluid level required for liquid-in-glass thermometer calibrations. A viewing channel is built into the top cover for a clear visual path to your glass thermometers.
The 6055 also has an optional thermometer carousel for holding several glass thermometers in the correct calibration position without exposing them to the hot salts in the bath. The Model 2018 Carousel is completely constructed of stainless steel and has an elevated handle for rotating your thermometers to the viewing position.
These deep-well baths are built to the same performance standards as all Fluke Calibration baths, which means you can’t find another bath that has better stability or uniformity.
|
7007 |
6054 |
6055 |
Range |
–5 °C to 110 °C | 50 °C to 300 °C | 200 °C to 550 °C |
Temperature Stability | ± 0.001 °C at 0 °C (water/ethanol) ± 0.001 °C at 25 °C (water) ± 0.003 °C at 100 °C (oil 5012) |
± 0.003 °C at 100 °C (oil 5012) ± 0.005 °C at 300 °C (oil 5017) |
± 0.003 °C at 200 °C (salt) ± 0.01 °C at 550 °C (salt) |
Temperature Uniformity | ± 0.004 °C at 0 °C (ethanol) ± 0.007 °C at 100 °C (oil 5012) |
± 0.007 °C at 100 °C (oil 5012) ± 0.015 °C at 300 °C (oil 5017) |
± 0.005 °C at 200 °C (salt) ± 0.010 °C at 550 °C (salt) |
Temperature Setting |
Digital display with push-button data entry | ||
Set-Point Resolution |
0.002 °C, high res. 0.00003 °C | 0.01 °C, high res. 0.00018 °C | |
Display Temperature Resolution |
0.01 °C | ||
Digital Setting Accuracy |
± 1 °C | ||
Digital Setting Repeatability |
± 0.005 °C | ± 0.01 °C | |
Heaters |
250 to 1000 W | 250 to 1000 W | 260 to 2080 W |
Working Area |
178 mm dia. (7 in) | 196 mm dia. (7.7 in) | 107 mm dia. (4.2 in) |
Depth |
24 in | 24 in | 24 in |
Wetted Parts |
304 stainless steel | ||
Power | 230 V ac (± 10 %), 50 or 60 Hz, 15 A (Specify frequency, contact Fluke Calibration if CE mark required.) |
230 V ac (± 10 %), 50/60 Hz, 15 A max |
230 V ac (± 10 %), 50/60 Hz, 15 A |
Volume | 42 liters (11.2 gal) | 50 liters (13.2 gal) | 19.8 liters (5.2 gal, 43 kg [95 lb] of bath salt) |
Size (D x W x H) | 470 x 775 x 194 mm to working surface (18.5 x 30.5 x 47 in), 1397 mm (55 in) to top of stir motor, 914 mm (36 in) to control panel | 572 x 762 x 1219 mm to working surface (22.5 x 30 x 48 in), 1422 mm (56 in) to top of stir motor box, 914 mm (36 in) to control panel | 572 x 775 x 1219 mm to working surface (22.5 x 30.5 x 48 in), 1524 mm (60 in) to top of stir motor box, 914 mm (36 in) to control panel |
Distance from Line of Sight to Top of Fluid |
9.5 mm (3/8 in) | 15.9 mm (5/8 in) | |
Automation | Use the 1586A Super-DAQ to automate temperature sensor calibration. For IEEE-488, add the 2001-IEEE to the automation package. | ||
Weight |
70.8 kg (156 lb) |
Model Name | Descripción |
---|---|
6054 |
Baño de pozo profundo de intervalo medio |
6055 |
Baño de pozo profundo de alta temperatura |
7007 |
Refrigerated Deep-Well Bath |
Accessories common to all models:
Accesorio | Descripción |
---|---|
Fluidos para baños | |
2018 |
Dispositivo de soporte de carrusel para el 6055 |
2069 |
Visor de 8 aumentos, con soportes |
Manuales de productos |
---|
Notas de la aplicación |
---|
Documentos |
---|
Fluke Calibration Bath Safety Features |
How to Choose a Calibration Bath |
On-Demand Webinars |
---|
How to Select the Right Temperature Calibration Bath |
- Inicio
- Productos
- Novedades de Fluke Calibration
- Calibración eléctrica
- Calibración de radiofrecuencia
- Equipo de adquisición de datos y pruebas
- Calibración de temperatura
- Calibración de humedad
- Calibración de presión
- Manómetros de pistón
- Controladores/Calibradores
- Monitores de presión
- Balanzas de pesos muertos
- Monitores y calibradores manuales
- Handheld Pressure Calibrators
- Calibración de datos de aire
- Monitores ambientales
- Accesorios de calibración de presión
- Sistemas personalizados de calibración de presión
- Software de calibración de presión
- Calibración de flujo
- Calibradores de procesos
- Software de calibración
- Servicio y soporte técnico
- Todos los instrumentos de calibración
- Instrumentos portátiles
- Comprar
- Novedades
- Capacitación y eventos
- Literatura y educación
- Soporte Técnico
- Service Request (RMA)
- Programas de servicio
- Servicio técnico
- Base de Conocimientos
- Acreditaciones
- Centros de servicio autorizados
- Calibration Certificates
- Community Forum
- My MET/SUPPORT
- Manuales de productos (guías de usuario)
- Hojas de datos sobre la seguridad (SDS)
- Programa de reciclado
- Safety, Service, and Product Notices
- Descargas de software
- Garantias
- Sobre Nosotros
Sidebar Request a Quote
Solicitar una cotización