- Autres entreprises Fluke:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
Experimental Study of Different Filling Gases on the Stability of Metal-Sheathed Standard Platinum Resistance Thermometers
There is a trade-off between the oxidation effect and element contamination in metal-sheathed standard platinum resistance thermometers (MSPRTs). Excessively high O2 partial pressure causes the platinum sensor to oxidize, and excessively low O2 leads to sensor contamination. The oxygen content in a thermometer may become unknown after a period of operation due to slow oxidation of the metal sheath and consequent loss of oxygen in the MSPRT. This can significantly affect the thermometer’s performance. Our recent research has shown that a thermometer may eventually become contaminated due to a deficiency of oxygen surrounding its element. In order to research this phenomenon and improve the stability of MSPRTs, ten MSPRTs were specially manufactured for testing. In this paper, the construction of these MSPRTs is described. A series of experiments and their results are presented. Based on the experimental results, a feasible solution (having the element sealed separately from its sheath) is put forward. This solution can resolve the conflict between the oxidation effect and element contamination and improve the long-term stability of MSPRTs. The Rtp and W(Al) stabilities of the MSPRTs with this new design can be as good as 1 mK and 2 mK respectively after operation at high temperature over 1000 h.
- Accueil
- Produits
- Nouveautés
- Étalonnage électrique
- Étalonnage RF
- Équipements de test et d'acquisition de données
- Étalonnage de la température
- Étalonnage d'humidité
- Étalonnage de pression
- Manomètres à piston
- Contrôleurs/Étalonneurs
- Moniteurs de pression
- Balances manométriques
- Étalonneurs et moniteurs manuels
- Handheld Pressure Calibrators
- Étalonnage de données d'air
- Moniteurs environnementaux
- Accessoires d'étalonnage de pression
- Systèmes d'étalonnage de pression personnalisés
- Logiciel d'étalonnage de pression
- Étalonnage de débit
- Outils d'étalonnage de process
- Logiciel d'étalonnage
- Service et assistance
- Tous les instruments d'étalonnage
- Instruments de mesure portables
- Où acheter
- Actualités
- Formation
- Littérature et de l'éducation
- Service et Support
- Service Request (RMA)
- Programmes d'assistance
- Assistance technique
- Base de connaissances
- Accréditations
- Centres de service agréés
- Calibration Certificates
- Community Forum
- My MET/SUPPORT
- Manuels des produits (manuels d'utilisation)
- Fiches de données de sécurité (FDS)
- Programme de recyclage
- Safety, Service, and Product Notices
- Garantie
- Téléchargements de logiciels
- Qui nous sommes