- Autres entreprises Fluke:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
The Melting Point of Tin
The benefits of using the melting point of tin (MPT) rather than its freezing point as a temperature fixed point are discussed. A procedure for the realization of the MPT with high accuracy was developed. An improved procedure for inducing the freeze by using outside-gas-flow cooling is also described. The calibration data obtained from the MPT are compared with that from the freezing point of tin. Thirteen SPRTs were calibrated on eighteen pairs of freezing curves and melting curves. The average difference between the melting point and freezing point was found to be –0.33 mK. The MPT can, therefore, be used to calibrate SPRTs instead of the freezing point of tin in the situations where an expanded uncertainty (k=2) of about 1.5 mK or larger is acceptable, which satisfies most requirements for SPRT calibrations.
- Accueil
- Produits
- Nouveautés
- Étalonnage électrique
- Étalonnage RF
- Équipements de test et d'acquisition de données
- Étalonnage de la température
- Étalonnage d'humidité
- Étalonnage de pression
- Manomètres à piston
- Contrôleurs/Étalonneurs
- Moniteurs de pression
- Balances manométriques
- Étalonneurs et moniteurs manuels
- Handheld Pressure Calibrators
- Étalonnage de données d'air
- Moniteurs environnementaux
- Accessoires d'étalonnage de pression
- Systèmes d'étalonnage de pression personnalisés
- Logiciel d'étalonnage de pression
- Étalonnage de débit
- Outils d'étalonnage de process
- Logiciel d'étalonnage
- Service et assistance
- Tous les instruments d'étalonnage
- Instruments de mesure portables
- Où acheter
- Actualités
- Formation
- Littérature et de l'éducation
- Service et Support
- Service Request (RMA)
- Programmes d'assistance
- Assistance technique
- Base de connaissances
- Accréditations
- Centres de service agréés
- Calibration Certificates
- Community Forum
- My MET/SUPPORT
- Manuels des produits (manuels d'utilisation)
- Fiches de données de sécurité (FDS)
- Programme de recyclage
- Safety, Service, and Product Notices
- Garantie
- Téléchargements de logiciels
- Qui nous sommes