- Other Fluke companies:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
See more Fluke brands
Fluke Calibration's constant volume valve is a pneumatically actuated needle valve with a return line connecting the inlet to a coaxial compensator. Needle displacement is matched by an equal and opposite volume displacement on the compensator.
The constant volume valve is used in piston gauge crossfloats and other applications in which two high pressures need to be disconnected and reconnected with minimal purturbations on either side.
Constant Volume Valve General Specifications |
|
| Port A connection: | DH200-2* |
| Port B connection: | DH200-2* |
| Drive air connection (to open valve): | -32 UNF F |
| Operating fluid: | Oil |
| Maximum line pressure: | 200 MPa (30,000 psi) |
| Maximum differential pressure on Port A or Port B: | 200 MPa (30,000 psi) |
| Drive air pressure required to open valve: | |
| With zero differential: | <500 kPa (70 psi) |
| With 200 MPa differential, Port A: | <400 kPa (60 psi) |
| With 200 MPa differential, Port B: | 750 kPa (110 psi) |
| Maximum drive air pressure: | 850 kPa (125 psi) |
| Typical change in volume on port A or B when the valve is opened or closed: | <0.2 mm |
* DH200-2 is equivalent to HIP HF2 for 1/8 in. OD, coned and threaded stainless steel tube.
| Model Name | Description |
|---|---|
| Constant Volume Valve |
Constant Volume Valve |
| Product Manuals |
|---|
Constant Volume Valve Installation Instructions (359.09 KB) |
- Home
-
Products
- New Products
- Electrical Calibration
- RF Calibration
- Data Acquisition and Test Equipment
- Temperature Calibration
- Humidity Calibration
- Pressure Calibration
- Flow Calibration
- Process Calibration Tools
- Calibration Software
- Handheld Test Tools
- Purchase Info
- News
- Training and Events
- Literature and Education
-
Service and Support
- Service Request (RMA)
- Service Plans
- Technical Support
- Knowledge Base
- Accreditations
- Authorized Service Centers
- Calibration Certificates
- Community Forum
- My MET/SUPPORT
- Product Manuals (User Guides)
- Register Products
- Safety Data Sheets (SDS)
- Recycle Program
- Safety, Service, and Product Notices
- Software Downloads
- Warranties
- About Us
Sidebar Request a Quote
Request a quote
We'd like your feedback.
You can help us improve our website »
Thank you!
Questions regarding Service, General Metrology, Certificates of Calibration or if you are in need of Technical Support can be submitted via our Support Request form.