- Autres entreprises Fluke:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
Low Voltage Traceability and Uncertainty Evaluation for High Accuracy Thermocouple Calibration Utilizing a Modern Automated Potentiometer
The Hart Scientific Division of Fluke Corporation manufactures a family of high quality noble metal thermocouples intended for laboratory applications. The calibration laboratory is required to calibrate these thermocouples to very low levels of uncertainty. Noble metal thermocouples are calibrated by fixed point over the range of 0 °C to 1000 °C. The temperature uncertainty components that contribute to the total uncertainty are easily dealt with in this laboratory because the laboratory has the capability for low uncertainty calibration of SPRTs. The equipment and procedures used in the SPRT process were easily adapted to thermocouple calibration. However, the voltage measurement aspects of the calibration are not so simple. The voltages generated vary between 1.7 mV and 16 mV, and the sensitivities vary between 8 V/°C and 24 V/°C de-pending on thermocouple type and temperature. With expanded uncertainty requirements be-tween 0.01 °C and 0.15 °C, nanovolt measurement accuracy is required. To further complicate matters, the Hart Scientific laboratory is an accredited laboratory with a high volume workload (relatively speaking) and strict quality control requirements; any solution proposed would have to be suitable for such an environment.
- Accueil
- Produits
- Nouveautés
- Étalonnage électrique
- Étalonnage RF
- Équipements de test et d'acquisition de données
- Étalonnage de la température
- Étalonnage d'humidité
- Étalonnage de pression
- Manomètres à piston
- Contrôleurs/Étalonneurs
- Moniteurs de pression
- Balances manométriques
- Étalonneurs et moniteurs manuels
- Handheld Pressure Calibrators
- Étalonnage de données d'air
- Moniteurs environnementaux
- Accessoires d'étalonnage de pression
- Systèmes d'étalonnage de pression personnalisés
- Logiciel d'étalonnage de pression
- Étalonnage de débit
- Outils d'étalonnage de process
- Logiciel d'étalonnage
- Service et assistance
- Tous les instruments d'étalonnage
- Instruments de mesure portables
- Où acheter
- Actualités
- Formation
- Littérature et de l'éducation
- Service et Support
- Service Request (RMA)
- Programmes d'assistance
- Assistance technique
- Base de connaissances
- Accréditations
- Centres de service agréés
- Calibration Certificates
- Community Forum
- My MET/SUPPORT
- Manuels des produits (manuels d'utilisation)
- Fiches de données de sécurité (FDS)
- Programme de recyclage
- Safety, Service, and Product Notices
- Garantie
- Téléchargements de logiciels
- Qui nous sommes