- Other Fluke companies:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
7615 Hydraulic Pressure Controller
This product has been discontinued as of July 30, 2021
- Ranges from 6000 to 40,000 psia (415 to 2750 bar)
- Precision to 0.01% of range
- High speed pressure control
- Control stability to 0.01% full scale
- Cycle mode for fatigue and pressure testing
- Labview® driver available
The Series 7615 Hydraulic Pressure Controller provides a unique, high speed approach to high pressure calibration and testing. Utilizing patented control technology, the 7615 can control to the set-point in five seconds or less for a pressure step up to 4 000 psi. A variety of pressure ranges are available to 40 000 psi (2 750 bar). The unit is compatible with virtually any non-corrosive pressure media including water, synthetic oils, Fluorinert, mineral oil, and others. The 7615 is also available with the Triple Scale / Dual Sensor option which can provide up to six ranges in one instrument.
The Fluke Series 7615 Hydraulic Pressure Controller (formerly Ruska 7615) provides a Fast control mode where the pressure setpoint is achieved in typically five seconds or less, even when controlling into a 50 cc load volume! This combination of speed, pressure range and compatibility with virtually any liquid media is unique to the 7615. The 7615 is an excellent choice for automated life cycle/fatigue testing applications, high volume transducer manufacturing such as diesel fuel rail sensors and transducers, high pressure automotive transducers such as those used in braking systems and throttle body sensors along with virtually any application that involves high pressure test or calibration using a liquid media for safety, compatibility or other concerns. The 7615 increases throughput and reduces cost through speed and automation without sacrificing performance. In addition to Fast mode, the 7615 also allows the option of operating in the Normal control mode where the contact parameters are optimized to provide the fastest route of pressure change with minimal overshoot.
Pressure Ranges |
|
Pressure Ranges | 6 000 psia (415 bar) 10 000 psia (700 bar) 15 000 psia (1035 bar) 20 000 psia (1400 bar) 30 000 psia (2070 bar) 40 000 psia (2750 bar) Tare mode allows operation in gauge mode. All above ranges can be provided with the triple scale option (see table below). The Series 7615 can be supplied in a dual sensor configuration. Select any two ranges shown above |
Triple Range Option | All above ranges can be supplied with the triple scale option to provide three ranges with a single sensor configuration and six ranges with the dual sensor configuration. For each selected sensor, the performance will be 0.01% of each range up to 20 000 psig (1400 bar) and 0.02% for 30 000 psig (2070 bar) and 40 000 psig (2750 bar).
Triple Range Scale Ranges psi (bar) |
Performance |
|
Measure | Ranges to 20 000 psia (1400 bar)
Ranges above 20 000 psia (1400 bar)
Precision is defined as the combined effects olinearity, repeatability, hysteresis and temperature effects over the entire operating temperature range 0 °F to 122 °F (-18 °C to 50 °C). Expression of accuracy (uncertainty) conforms with the recommendations of the ISO guide to the expression of uncertainty in measurement and includes RSS of precision, stability, temperature effects, and the calibration standard to 2 sigma (95%). |
Control |
Low control point: When controlling from a higher pressure to a lower pressure, low control point is 400 psig (27 bar). Unit can be vented to 0 psig (0 bar). |
Options |
|
Options | Triple scale option Dual sensor External priming vent valve Rackmount kit |
General |
|
Pressure Supply | 100 to 110 psig (6.9 to 7.5 bar) dry air @ 5 SCFM peak (150 SCLM) |
Test Port Connection | Autoclave F250C |
Supply Pressure Connection | 1/4 in NPTF |
Display | Vacuum fluorescent, graphical |
Tare Mode | Tare mode included for gauge calibrations |
Calibration | A calibration report providing traceability to the National Institute of Standards and Technology (NIST) is provided with each instrument. NVLAP accredited calibration to ISO 17025 is available as an option.
Recommended calibration interval is one year. |
Electrical | 110 to 220 V ac, 50/60 Hz |
Temperature | Operating: 0 °F to 122 °F (-18 °C to 50 °C) Storage: -4 °F to 122 °F (-20 °C to 50 °C) |
Humidity | 5 to 95% relative humidity, non-condensing |
Dimensions (h x w x d) | 14 in x 17 in x 26 in (35.5 cm x 43 cm x 66 cm) |
Weight | 150 lb (68 kg) |
Model Name | Description |
---|---|
7615 |
High Speed Pressure Controller |
Accessories common to all models:
Accessory | Description |
---|---|
Priority Gold Instrument CarePlan |
Fluke Calibration Priority Gold Instrument CarePlans are available for most calibration products. Please contact your local Fluke Calibration sales representative for details or to request a quote. You may also call the Customer Care Center at 800-882-6153 or send email to premiumcare@fluke.com. |
Silver CarePlan |
Fluke Calibration Silver CarePlans are available for most calibration products. Please contact your local Fluke Calibration sales representative for details or to request a quote. You may also call the Customer Care Center at 877-355-3225 or send email to careplans@flukecal.com. |
Product Manuals |
---|
Data Sheets |
---|
Software |
---|
7615 Hydraulic Pressure Controller - Version 2R24 |
Papers / Articles |
---|
- Home
- Products
- New Products
- Electrical Calibration
- RF Calibration
- Data Acquisition and Test Equipment
- Temperature Calibration
- Humidity Calibration
- Pressure Calibration
- Flow Calibration
- Process Calibration Tools
- Calibration Software
- Service and Support
- All Calibration Instruments
- Handheld Test Tools
- Purchase Info
- News
- Training and Events
- Literature and Education
- Service and Support
- Service Request (RMA)
- Service Plans
- Technical Support
- Knowledge Base
- Accreditations
- Authorized Service Centers
- Calibration Certificates
- Community Forum
- My MET/SUPPORT
- Product Manuals (User Guides)
- Safety Data Sheets (SDS)
- Recycle Program
- Safety, Service, and Product Notices
- Software Downloads
- Warranties
- Tools
- About Us
Sidebar Request a Quote
Request a quote