• Andere Unternehmen von Fluke:
  • Fluke
  • Fluke Biomedical
  • Fluke Networks
  • Fluke Process Instruments
Weitere Marken von Fluke
Accelix Amprobe Beha-Amprobe Comark Emaint Landauer Pacific Laser Systems Pomona RaySafe Schad
Startseite
Precision, Performance, Confidence.
Fluke Calibration: Europe
  • Registrieren
  • Anmelden
  • Contact Us

EU - German (Deutsch) [Change]

 

Don’t get fooled: what to look for when buying an isothermal bath

If you’re in the market for an isothermal bath (temperature calibration bath), you may have already noticed that many suppliers provide technical specifications that are confusing or incomplete. You might only be able to find a performance spec for a single temperature point, not for the bath’s whole temperature range. Or they don’t say which bath fluid was used in testing.
 
An isothermal calibration bath is a significant investment so you need to get enough information – and the right information – to help you make the best decision. Here are four key specifications to evaluate:

Temperature range and bath fluids

Often no one bath fluid will work well over an isothermal bath’s entire temperature range. For example, a Fluke Calibration 7341 Deep-Well Compact Bath has a range from -45 °C to 150 °C. Below 0 °C Ethanol is a good fluid, but you’d need another fluid, like silicone oil, at temperatures above that. If you need to cover your bath’s full temperature range, you’ll want to decide between changing bath fluids or using more than one bath unit.

Stability

When a bath maintains a constant temperature over time, we say it is stable. Stability varies at different temperatures but some suppliers only give out one spec at or near ambient, and they don’t mention that it only applies to one temperature or a narrow range. Be sure you understand a bath’s stability over the entire temperature range that you care about.
 
You also need to ask what fluid the manufacturer used when they defined the stability specification, because bath fluid affects stability. For example, at 37 °C a bath is more stable with water as the fluid. If you use oil, you can expect somewhat more instability, and if that oil has high viscosity at 37 °C you can expect even greater degradation.

Uniformity

A bath must be the same temperature throughout the test zone where you’ll make your measurements. The uniformity specification defines the peak value for this error source. The more probes you test, the larger the test zone – and the more important uniformity becomes.
 
Uniformity depends mostly on the way the bath fluid is mixed. Does the bath use a circulator pump for mixing? If so, are there thermal flow patterns in the bath that interfere with uniformity? Check both the vertical and horizontal temperature gradients.

Tank size

How many probes and sensors do you need to calibrate? If your workload is large, you may want to look for an isothermal bath with a large tank size.  What about the length of your sensors? Longer SPRTs, PRTs and liquid-in-glass thermometers require a bath with plenty of immersion depth. What about oddly-shaped sensors? If you are calibrating tri-clamp sanitary sensors, for example, you should look for a bath that accommodates them (by the way, we make baths like that: the 6109A and 7019A Portable Calibration Baths).
 

Would you like more details about choosing an isothermal or temperature calibration bath?

You’ll find them here:
Buying the right temperature calibration bath for your laboratory application note
Tips for Selecting and Using Bath Flukes on-demand webinar
How to select a calibration fluid application note
 
You can also get live help from one of our isothermal bath application experts who will help you evaluate specifications to ensure you’re covered.
 
Speak with an expert

Steve Potter, Global Marketing Manager at Fluke Calibration
Posted by Steve Potter on Mär 20, 2018
Steve Potter is the Global Marketing Manager for Temperature Calibration products. His responsibilities include go-to-market strategy and coordination with regional teams worldwide, new product introductions, brand awareness, product promotion, and content development. He is a graduate of Brigham... Full Bio
  • Anmelden oder Registrieren um Kommentare zu schreiben
  • Printer-friendly version »
  • Startseite
  • Produkte
    • Neue Produkte
    • Elektrische Kalibrierung
      • Elektrische Normale
      • Kalibratoren
      • Tischmultimeter
      • Software für elektrische Kalibrierung
    • HF-Kalibrierung
      • HF-Referenzquellen
      • Zubehör für die HF-Kalibrierung
      • Kalibriersoftware für DC-, NF- und HF-Anwendungen
    • Datenerfassung und Testgeräte
      • Labor- und Tischmultimeter
      • Messdatenerfassung
      • Funktions- und Signalgeneratoren
      • Messdatenerfassungssoftware
    • Temperaturkalibrierung
      • Primäre Normale
        • ITS-90 Fixpunktzellen
        • Platinwiderstandsthermometer-Normale
        • Erhaltungsvorrichtungen
        • Flüssigstickstoff-Vergleichskalibrator
        • Widerstandsbrücken
        • Widerstandsnormale
      • Kalibrierbäder
        • Kompakte Kalibrierbäder
        • Standard-Kalibrierbäder
        • Bäder für spezielle Anwendungen
        • Kalibrierbadzubehör
        • Temperaturregler für Kalibrierbäder
        • Kalibrierbadflüssigkeiten
        • Kundenspezifische Kalibrierbäder
      • Temperaturkalibratoren für die Industrie
        • Portable Blockkalibratoren für metrologische Anwendungen
        • Blockkalibratoren für metrologische Anwendungen
        • Hand-Blockkalibratoren
        • Mobile Blockkalibratoren
        • Mikrobäder
        • Infrarotkalibratoren
        • Blockkalibratoren für Thermoelemente
        • Doppelkammer-Blockkalibrator
        • Nullpunkt-Blockkalibrator
      • Sonden/Sensoren
        • Platin-Widerstandsthermometer (PRTs)
        • Thermistoren
        • Normal-Thermoelemente
      • Thermometer mit Digitalanzeigen
      • Multifunktionskalibratoren
      • Software für die Temperaturkalibrierung
    • Feuchtekalibrierung
      • Feuchtegeneratoren
      • Datenlogger und Überwachungsgeräte für Feuchte
    • Druckkalibrierung
      • Kolbenmessgeräte
        • Kolbenmanometer für Metrologieinstitute
        • Absolutdruck-Kolbenmanometer
        • Pneumatische Kolbenmanometer für hohe Drücke
        • Hydraulische Kolbenmanometer
        • Zubehör für Kolbenmanometer
      • Controller/Kalibratoren
        • Niederdruckregler und -kalibratoren
        • Pneumatische Druckregler und -kalibratoren
        • Pneumatische Hochdruck-Gasregler und -kalibratoren
        • Hydraulische Regler und Kalibratoren
      • Druckmonitore
        • Niederdruckmonitore
        • Digitale Druckmanometer
        • Referenzdruckmonitore
      • Druckwaagen
        • Pneumatische Druckwaagen
        • Druckwaagen mit Medium Öl
        • Druckwaagen mit Medium Wasser
        • Hydraulische Hochdruckwaagen
        • Zubehör für Druckwaagen
      • Manuelle Kalibratoren und Monitore
        • Druckkalibratoren
        • Regelung des pneumatischen Drucks
        • Hydraulische Vergleichstestpumpen
      • Handheld Pressure Calibrators
      • Luftdaten-Kalibrierung
      • Messgeräte zur Überwachung der Umgebungsbedingungen
      • Druckkalibrierungszubehör
      • Benutzerdefinierte Druckkalibriersysteme
      • Software zur Druckkalibrierung
    • Durchflusskalibrierung
      • Gasdurchflussnormale
      • Gasdurchflusszubehör
      • GFS Primärer gravimetrischer Strömungsstandard
      • Durchflusskalibriersoftware
    • Prozesskalibratoren
      • Temperaturkalibratoren
        • Tragbare Temperaturkalibratoren
        • Blockkalibratoren und Mikrobäder
        • Digitale Präzisionsthermometer
        • Temperaturmessfühler
        • Infrarotkalibratoren
        • Hygro-Thermometer mit Datenprotokollierung
      • Druckkalibratoren
        • Digitale Druckkalibratoren
        • Tragbare Druckkalibratoren
        • Druckwaagen
        • Digitale Präzisionsmanometer
        • Handpumpen zur Kalibrierung
      • Multifunktionskalibratoren
      • Kalibratoren für mA-Stromschleifen
      • Prozesskalibrierungs-Software
    • Kalibriersoftware
      • MET/CAL-Software
      • MET/CAL-Support
      • Bestandsverwaltungssoftware
      • Software für die Temperaturkalibrierung
      • Druckkalibrierungssoftware
      • Durchflusskalibriersoftware
      • Software für die mechanische/dimensionale Kalibrierung
    • Service und Support
    • Alle Kalibriergeräte
    • Hand-Messgeräte
  • Kaufinfo
    • Bezugsquellen
    • Angebot anfordern
    • Anforderung einer Präsentation
    • Anforderung einer Beratungsleistung
    • Certified Pre-Owned Equipment
    • General Services Administration (GSA)
    • Financing Program
    • National Stock Numbers (NSNs)
    • Payment Options and Tax Info
  • Aktuelles
    • Pressemitteilungen
    • Aktionen
    • Branchenverbindungen
    • Metrology Salary Survey
  • Schulung/Veranstaltungen
    • Messen und Seminare
    • Schulungskurse (in USA)
    • User Group Meetings
    • Web Seminare
      • Live-Seminare
      • On-Demand Seminare
  • Literatur/Ausbildung
    • Education Hub
    • About Calibration
    • Artikel und Ausbildung
    • Produktliteratur
    • Produkthandbücher (Bedienungsanleitungen)
    • Videos und virtuelle Demos
    • Ressourcencenter
    • Blog
  • Service/Unterstützung
    • Service Request (RMA)
    • Serviceprogramme
    • Technischer Support
    • Wissensbasis
    • Akkreditierung
    • Autorisierte Servicezentren
    • Calibration Certificates
    • Community Forum
    • My MET/SUPPORT
      • Activate
      • Procedures
      • Software
      • Technical Bulletins
      • Priority Support
      • Manuals
    • Produkthandbücher (Bedienungsanleitungen)
    • Produkte registrieren
    • Sicherheitsdatenblätter (SDS)
    • Recyclingprogramm
    • Safety, Service, and Product Notices
    • Gewährleistungen
    • Software-Downloads
  • Über uns
    • Kontakte
    • Besuchen Sie uns
    • Fluke Calibration
      • Hart Scientific Temperaturkalibrierung
      • DH Instruments Druck- unde Durchflusskalibrierung
      • Pressurements Druckkalibrierung
      • Ruska Druckkalibrierung
    • Karriere
    • Fluke Tochterunternehmen
    • Integrität und Konformität
    • Häufig gestellte Fragen
    • Why Buy From Fluke Calibration?
Startseite|Blog|Don’t get fooled: what to look for when buying an isothermal bath

Wir hätten gerne Ihr Feedback
Sie können uns dabei helfen, diese Website zu verbessern.

Vielen Dank!

©1995-2021 Fluke Corporation
             

Secondary menu

  • Disclaimer
  • Datenschutz
  • Webmaster
  • Terms of Use
  • Allgemeine Verkaufsbedingungen